Downloads & release history
SmartConfig software releases
SmartConfig2 configuration software downloads and complete release history.
SmartConfig2 software
Download the latest software to communicate with the SmartSampler here. If you require support for an older version, please contact us.
The software is free to download, but a license key is required for operation. Contact us to request a key.
Latest Version
V0.3.5 (21.11.2026)
Faster visual programming and clearer device diagnostics
- Faster task editing Select multiple actions with Ctrl+click, a selection rectangle or Ctrl+A, then move them together.
- Easier action insertion Drop an action onto a highlighted program connection to insert it directly into the sequence.
- Automatic program layout Arrange tasks clearly with the new main-canvas Auto layout button.
- Smoother navigation Improved zoom, panning and Fit graph make larger programs easier to explore.
- SD-card health at a glance View storage status, pending measurements, recovered writes and the last successful save under Advanced → System Info → Diagnostics.
- Clearer connection feedback Updated telemetry indicators show connection progress, recovery stages and signal status. Remote health reports include timing information to help assess their freshness.
The new storage-health diagnostics require firmware 1.0.2 and SmartConfig2 0.3.5.
Full change log
V0.3.4 (11.11.2026)
Easier TreeFlux setup and clearer telemetry controls
- Easier TreeFlux setup Set tubing pre-flush time, bag filling and evacuation times, and the number of preparation cycles in a scrollable settings panel.
- Clearer telemetry controls The Auto network recovery setting now explains when the sampler retries a cellular connection.
- Easier live monitoring Updated the layout of the live data box and Serial Monitor.
- Smoother Windows upgrades The installer refreshes the Visual Programmer component when upgrading an existing installation.
Use SmartSampler2 firmware 1.0.1 for the expanded TreeFlux controls.
V0.3.3 (30.10.2026)
Visual Programmer — New Features & Improvements
- Ready-made task templates for repeating measurements, timed outputs and sensor warm-up.
- Drag-and-drop programming with configurable tasks and visual connections.
- Easier navigation through searchable, collapsible action categories.
- Clearer layouts with automatic task arrangement and improved loop connections.
- Flexible editing with adjustable program notes and moving multiple blocks together.
- Program checks to help identify missing connections before applying your program.
V0.3.2 (29.10.2026)
- Added Task Groups to organize consecutive Visual Programmer blocks, with rename, collapse, expand, ungroup, and move-as-a-unit controls.
- Added a resizable task editor for moving and adding blocks, connecting and disconnecting them, and adjusting connection bends.
- Kept Task Groups separate from firmware subprograms; generated programs still use the ordinary command sequence.
- Saved Task Groups in .smartcode projects and restored groups from markers in exported program comments.
- Improved task editor headings and controls for long task names.
Task Groups organize the visual editor without introducing new firmware commands or subprograms.
V0.3.1 (29.09.2026)
Use SmartSampler2 firmware V0.4.0 for the updated time-offset controls and module reset command.
- Expanded the Visual Programmer module commands, including reset and special module commands.
- Changed the default parameter order to T, S, O, I, P.
- Removed the unused averaging option, original User-defined code helper, and Send while idle option.
- Updated time-offset controls for firmware V0.4.0.
- Improved loaded-setting indicators and added a confirmation before disabling telemetry and wireless access.
- Disabled the sampler-mode flowchart zoom popup for User-defined programs.
V0.3.0
- Added a resize thumb to Serial Monitor.
- Made Data and Modbus live-message grids use available space automatically.
- Improved live telemetry handling and device selection.
V0.2.9
- Updated the software license agreement.
- Increased the Visual Programmer font size.
V0.2.8 (13.08.2026)
- Improved the visual editor and wireless connection.
- Added spell-check support.
V0.2.7 (08.08.2026) only compatible with SmartSampler2 V0.3.5 and above
- Improved Wireless connection
- live communication
- enhanced security
- added visual code editor
- Fully self contained solution including service packs
V0.2.6 (26.07.2026)
- Improved Serial Handling and Debug report
V0.2.5 (23.07.2026)
- Added high-resolution data upload.
V0.2.4 (22.07.2026)
- Improved handling of wireless connection errors.
V0.2.3 (21.07.2026)
- Export and import the full settings and configuration.
- Use unique names for telemetry IDs with compatible server configuration.
V0.2.2 (02.07.2026)
- Added 6 more user defineable parameters (total of 12 now)
- Update for new Wireless connection
V0.2.1
- Added support for the new Smart Sampler Solutions telemetry connection.
- Improved handling for the telemetry connection.
- Improved remote command/data polling after sending values.
- Updated device selector to work with the new telemetry setup.
V0.2.0
- added MultiPlexer module commands for manual switching
V0.1.9
- Maintenance release.
V0.1.8
- Improved File Download
- Improved UI responsiveness by reducing blocking operations
- Added updates and improvements for TreeFlux integration
- Initial GPS functionality added
- Configuration fields now retain values after sending
- allows verification of received settings and easy re-send if needed
V0.1.7
- TreeFlux Mode: added flush time for bags
V0.1.6
- Improved file downloads from the logger.
- added debug log
V0.1.5
- adjusted user defined program helper to changes in firmware
V0.1.4
Dynamic line helper, insert function at cursor, and improved validation for user-defined programs.
- Shows the function helper dynamically for the code line where the caret is placed — click any line and the helper updates to show required parameters.
- Inserts new function code at the caret (or replaces the current selection) instead of always appending to the end of the file.
- Performs plausibility checks before adding functions and strengthens code error checking on the Sampler to avoid invalid configurations.
V0.1.3
- Pulse counter reset button with function
- Improved User defined program helper
V0.1.2
- addapted to new hardware
- improved and added functions to User defined Program
V0.1.1
- Updated from to match SmartSampler2 release
V0.1.0
- Does not change advanced option after disconnect
V0.0.9
- Added user definable Parameter to be changed without changing Programm code
- Added Relay Module
V0.0.8
- Performance update
- added more configuration
- Updated TreeFlux module handling
V0.0.7
- Added Serial configurations
- Data bits, parity, stop bit
V0.0.6
- Added FlowControl calibration field for direct input and control
V0.0.5
- Modbus RTU/RS-485 integration
- Added indicators for TreeFlux
- Added time to default file name for saving data log (YYYY_MM_DD_hh_mm_NAME)
V0.0.4
- SmartSampler2 V0.0.3 and above needed for communication
- improved communication
- added flow charts on Sampler Mode selection
- Added Pods
- Added Formula test area
- shows Modules and settings depending on Sampler Mode
V0.0.2 – 0.0.3
- Added multiple sampler modes.
V0.0.1
- Maintenance release.
V0.0.0
- Initial Release
