Power Supply Check
Ensure the SmartSampler is connected to a power supply capable of providing at least 10VDC. The On/Off switch will illuminate if a power source is detected, confirming the connection.
Port Enable Check
In the SmartConfig menu, verify that the required module port is enabled. If the option to enable the port is not available, the SmartSampler may be missing the necessary feature.
To confirm, navigate to Advanced → System Info and check that the Module feature is listed as active. If not, a license upgrade may be required.
Manual Valve Switch Check
Once the power supply and port settings are verified, navigate to Module → AquaMate → Manual Valve Switch. Here, you can individually activate each valve. The valves should produce a noticeable clicking sound, indicating proper mechanical function.