[featured_image]
Download
Download is available until [expire_date]
- Version V1.2.0
- Download 46
- File Size 11 MB
- File Count 1
- Create Date August 4, 2022
- Last Updated June 21, 2024
Software SmartConfig
Changelog
V1.2.0
- added "call modules" button in the module tab
V1.1.9
- added commands to user defined mode
- added optional parameter to the function selecter
- updated firmware uploader to detect matching firmware and device
- addded debug switch in the Advanced tab
- needed if formating storage or if save all data
V1.1.8
- Changed layout
- moved external windows (module,output, sensor) into Main window
- improved data download
- introduced license system
V1.1.7
- added SDI-12 support
V1.1.6
- added EXO wipe button
V1.1.5
- added output 4 support
V1.1.4
- added "gravity drained" option to the System configuration
V1.1.3
- added changebale write speed setting for reading the datalog file
- for bigger files it is recommended to use the slowest setting
V1.1.2
- added SDI-12 to RS-232 Adapter support in Sensor settings
- added warm up time in main window (advanced switched on)
- show all settings in the custom command field
V1.1.1
- changed apperance of the RS-232 sensor tab
- added general tab in the Module window to selevt connected modules
- enables the SmartSampler from version 0.1.2 to communicate also with SmartTransmit v0.0.8 and below
V1.1.0
- Software will start in "Basic" mode
- basic controls for increased clarity
- can be switched to advanced controls anytime
- Added EXO / RS-232 support
- Added Low Voltage threshold to save power if drops below this voltage
- Added colour coded start/stop button
V1.0.4
- Main improvements
- improved user experience
- important buttons are now in the Menu bar
- replaced check box with "fancy" toggle switch
- changed coloring for information's, only serious errors should be red
- renamed multiple labels for better understanding
- added default file names for save dialog, pattern: SERIALNUMBER_DATE_FILENAME
- moved time/RTC sync to main tab
- changed 1st trigger to "start time", moved settings for delayed start to basics tab
- added some tool tips while hovering over stuff which might be unclear
- fixed shifting on windows size change
- unsaved changes should be now recognized and prompt a message box for the user
- Sensors window
- moved "input" connector side to sensors
- only one toggle switch on basics for showing whether it is on or off
- double click on specific port will direct to specific tab
- Output
- added message box for PWM switching with warning
- added first draft for output modules
V1.0.3
- new
- minor visual updates
- use of toggle switches instead of check box
- added
- basic feedback information's for modules
- Auto update switch to disable automatic communication
- show process of downloaded file
V1.0.2
- added
- calibration for port "Out4"
- fine tuning off output ports
- support of 18 outputs
V0.0:
- Initial upload.